How much will it cost ?

[Thebroady]

Looking at buying a 99 model. Seller says might need baffles for the exhaust to pass roadworthy.

Is it possible to have drop in DB killers made to fit the exhaust. I do not know what brand they are.

Also are these disks anygood

Thanks,
Broady

[pom in nz]

i have those discs on my trx, they are absolutely fine, dont know how they would go on the track though

[Tarwetijger]

About DB killers: a good mechanic can make you some.
I know a (dutch) store that has some universal sizes made up and they're very reasonable priced:
http://www.japparts.nl/index.php?main_p ... 3fmo8shm97

i have those discs on my trx, they are absolutely fine, dont know how they would go on the track though

I do, they're not bad...

[cobbadiggabuddyblooo]

You can find std cans for a song that come up quite often on e bay and gumtree. There are some going at present on Gumtree. If you ever sell the bike again put those back on , I'm sure you'll make dollars on your aftermarket cans as a bonus have a look there is a pair of wheels local too with discs that may do the job. Take the discs and I sell the wheels again

[Thebroady]

Thanks for the advice/tips.
After a bit of research I see you can buy universal DB killers for the
diameter of the silencer. They are pretty cheap to.

Do the DB killers actually reduce the noise by much ?
or am I better off going with Cobba's suggestion and trying to get some
standard cans ?

[fung]

up to you broady .
std cans are approx 6kg each and are real quiet.
aftermarkets tend to weigh a lot less and can liberate the breathing of a trx . add in a K&N and you may notice some more sting in her tail
IMHO of course.
cheers
fung

[cobbadiggabuddyblooo]

once you got it registered you just take the std cans off again and run the aftermaket cans that breathe once again.. there only there to serve a purpose to getting it registered and if ever you sell the bike you'll benifit as a stock motorcycle will always gather more resale

[Thebroady]

Thanks Fung & Cobba. Yeah it's only to get the bike through roadworthy. I was just curious if anybody else had used the db killers to pass
rego and if they actually make much of a difference in DB reduction. I have read that the noise reduction they give is questionable.
I have no intention of taking the cans off. Was just weighing up the quickest and cheapest option to pass inspection.

[Stu99]

G'day Broady,
Do you know the diameter of baffles you need. I have a few in the shed you are welcome to if they will do the trick for you.
I have no need for them, don't believe in making the TRX quiet.