Is the spec of the coils on the trix 3 ohms?
Just cant find info anywhere!
Maybe someone here drives with dynatek?
Ignition coils....
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
Ignition coils....
Tourqe-a-holic
-
HolerTogni
- Site Sponsor
- Posts: 703
- Joined: Thu Aug 24, 2006 3:14 pm
- Location: Germany - Munich
- Contact:
Hi Killerwhale!
According to the English TRX Service Manual (look in the member's section - downloads; chapter 8, page 261)
Primary coil resistance is 3.4 ~ 4.6 Ohm at 20°C
Secondary coil resistance is 10.4 ~ 15.6 Ohm at 20°C
(BTW: The values in the German manual are the same
)
Happy measuring!
According to the English TRX Service Manual (look in the member's section - downloads; chapter 8, page 261)
Primary coil resistance is 3.4 ~ 4.6 Ohm at 20°C
Secondary coil resistance is 10.4 ~ 15.6 Ohm at 20°C
(BTW: The values in the German manual are the same
)Happy measuring!
Nothing against four cylinders:
TRX 850 & Racetrack-TRiXie
-
Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
Are these actually the ignition ones up under front of tank?? Shouldn´t they be the same??HolerTogni wrote:Hi Killerwhale!
According to the English TRX Service Manual (look in the member's section - downloads; chapter 8, page 261)
Primary coil resistance is 3.4 ~ 4.6 Ohm at 20°C
Secondary coil resistance is 10.4 ~ 15.6 Ohm at 20°C
(BTW: The values in the German manual are the same
Happy measuring!
Well, i guess i´ll be taking home the multi from work and measure!
Tourqe-a-holic
