Chaisis Bearings / Bearing Numbers / Sizes / Oil Seals

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
Con Rod
Site Sponsor
Posts: 1126
Joined: Wed Nov 16, 2011 11:48 pm
Location: Sydney, Australia

Chaisis Bearings / Bearing Numbers / Sizes / Oil Seals

Post by Con Rod » Wed Dec 07, 2011 5:55 am

Hi All,

As part of the refurb of my TRX I am replacing all of the chassis. Just spent a heck of a long time putting together a list of the bearing types, sizes and numbers using the search function on this site and going through a load of other sites so I thought some people might find it helpul to have the list all in one place.

These bearing sizes are for a standard TRX with stock wheels, swing and head stem etc:

Part............Yamaha Part........Bearing Type.................Bearing Size.......Bearing.........Quantity
.....................Number...................................................................Number.........Required


Swing Arm........93315-42523........Needle Roller Bearing.......25 33 25............TA 2525 Z..........2
Bearings..................................Bearing Open End Type.................................................


Shock Pivot.......93317-31771........Needle Roller Bearing.......17 24 20............TA1720Z............6
Bearing...................................Open End Type............................................................

Head stem........93399-99932.........Tapered Roller Bearing....47 25 15............32005...............1
Bearing (UPPER)...................................................................................................

Head stem……….93399-99931…………..Tapered Roller Bearing…….55 30 17……….32006......................1
Bearing (LOWER) ............................................................ ..........................................

Front Wheel……..93306-20314………..…Deep-groove Ball……….17 40 12………6203 (2RS)……………..........2
Bearings...................................Bearings Two Shields...........................................


Rear Wheel………93306-20417…...……..Deep-groove Ball…………20 47 14……….6204 (2RS)……...........………2
Bearings....................................Bearings Two Shields.....................................................

Bearing……………93306-20644…………Deep-groove Ball……………….30 62 16……….6206 (2RS)………1
Sprocket carrier..............................Bearings Two Shields............................................................
Last edited by Con Rod on Tue May 07, 2013 2:04 am, edited 3 times in total.
Paul

User avatar
Mincehead
TRX-Enthusiast
Posts: 6345
Joined: Sun Jan 25, 2009 1:40 pm
Location: West Sussex
Contact:

Re: Chaisis Bearings / Bearing Numbers / Bearing Sizes

Post by Mincehead » Wed Dec 07, 2011 7:41 am

Nice one Con Rod, I tend to use the download section of the forum to look up such stuff but it`s useful to have it all present in one thread. =D>
LOUD PIPES SAVE LIVES

User avatar
phuk72
Site Sponsor / Administrator
Posts: 3522
Joined: Thu Jan 06, 2005 1:47 pm

Re: Chaisis Bearings / Bearing Numbers / Bearing Sizes

Post by phuk72 » Wed Dec 07, 2011 11:01 am

Mincehead wrote:Nice one Con Rod, I tend to use the download section of the forum to look up such stuff but it`s useful to have it all present in one thread. =D>
Nice one indeed - I'll make it sticky :)
Image

User avatar
Con Rod
Site Sponsor
Posts: 1126
Joined: Wed Nov 16, 2011 11:48 pm
Location: Sydney, Australia

Re: Chaisis Bearings / Bearing Numbers / Bearing Sizes

Post by Con Rod » Thu Dec 08, 2011 6:38 am

Here is the excel spreadsheet, probably a bit easier to read:
TRX Bearings.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by Con Rod on Tue May 07, 2013 2:30 am, edited 2 times in total.
Paul

User avatar
dandywarhol
Site Sponsor
Posts: 1639
Joined: Fri Nov 24, 2006 12:56 pm
Location: Edinburgh, Scotland

Re: Chaisis Bearings / Bearing Numbers / Bearing Sizes

Post by dandywarhol » Thu Dec 08, 2011 10:14 am

=D> =D> =D> =D>
1996 TRX 850, blue, Ohlins 46HRCLS, Race Tech Gold Valves, 0.90 springs, Venom pipes, R6 brakes............
1974 Yamaha RD250A, Candy Blue
1998 Yamaha SZR660, blue of course
1967 Yamaha TD1C 250, Blue and white

User avatar
Con Rod
Site Sponsor
Posts: 1126
Joined: Wed Nov 16, 2011 11:48 pm
Location: Sydney, Australia

Re: Chaisis Bearings / Bearing Numbers / Sizes / Oil Seals

Post by Con Rod » Tue Dec 13, 2011 3:01 am

Table updated to include oil seal sizes (I have not yet compared these with the ones that came off the bike but will update if any sizes are different.
Paul

User avatar
2TWINS
TRX-Enthusiast
Posts: 47
Joined: Wed Apr 13, 2011 4:11 pm
Location: Staffordshire, UK

Re: Chaisis Bearings / Bearing Numbers / Sizes / Oil Seals

Post by 2TWINS » Wed Mar 14, 2012 10:23 pm

That spreadsheet was fantastic!
Just had a spare pair of wheels powder coated and used the chart to order all the new bearings and seals.
Just 1 seal (sprocket carrier I think) was 1mm thicker. The one recommended and duly supplied was the same as that used on an R6.
If anyone wants a supplier for the lot, even labelled up individually for you, then let me know. I'd recommend the guy's who supplied mine and you can choose branded or non-branded bearings, up to you!

Top tip - put bearings in the freezer over night, makes fitting them much easier!

robi_kihm@yebo.co.za
TRX-Enthusiast
Posts: 8
Joined: Mon Aug 16, 2010 7:53 am

Re: Chaisis Bearings / Bearing Numbers / Sizes / Oil Seals

Post by robi_kihm@yebo.co.za » Fri Feb 22, 2013 10:17 am

Thank you very much for this info , helped a lot :)

User avatar
Snod Blatter
TRX-Enthusiast
Posts: 405
Joined: Sun Sep 16, 2012 8:40 am
Location: Worksop, UK

Re: Chaisis Bearings / Bearing Numbers / Sizes / Oil Seals

Post by Snod Blatter » Thu May 30, 2013 6:07 pm

Does anyone know what the size of the seal for the left hand front wheel bearing would be? Its diameter is more than 40mm, is it not?

To update, the correct part numbers and sizes are:

Right hand dust seal (part number 93102-23252) is indeed 23-40-7mm.

Left hand dust seal (part number 93105-45017) is 45-56-6mm.
'95 4NX with K&N filter, Motad Venom cans, YSS PD valves, Ohlins fork springs, 530 C+S, Green CDI, 11/16 radial master cylinder, +30mm jack up dog bones. Enjoyable money pit.

User avatar
Con Rod
Site Sponsor
Posts: 1126
Joined: Wed Nov 16, 2011 11:48 pm
Location: Sydney, Australia

Re: Chaisis Bearings / Bearing Numbers / Sizes / Oil Seals

Post by Con Rod » Sun Jun 01, 2014 9:09 am

For anyone with a YZF750 rear wheel, being sizes etc:
YZF750 R wheel bearings.jpg
You do not have the required permissions to view the files attached to this post.
Paul

Post Reply