Clutch....noise-ish

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
Killerwhale
Site Sponsor
Posts: 3797
Joined: Tue Aug 22, 2006 8:41 am
Location: GBG/Sweden
Contact:

Clutch....noise-ish

Post by Killerwhale » Wed Jul 23, 2008 8:33 pm

Well, my clutch has started to be more noisy over time when put in gear at stand still.
Today i rolled it back and forth in gear...engine off...and there where a small "clonk" when going back and then again when going forward....also had drag when lever was all the way in.

Time for new plates again....but more important time for a new basket??
...now that the TRX are known to chew away on the basket...!?!?

What say you??

youngy

Re: Clutch....noise-ish

Post by youngy » Wed Jul 23, 2008 9:07 pm

I'd say basket and maybe hub too.

User avatar
Killerwhale
Site Sponsor
Posts: 3797
Joined: Tue Aug 22, 2006 8:41 am
Location: GBG/Sweden
Contact:

Re: Clutch....noise-ish

Post by Killerwhale » Wed Jul 23, 2008 9:31 pm

youngy wrote:I'd say basket and maybe hub too.
...hub, is that the "lid" which screws into the whole shabang??
....i KNOW i´ve seen aftermarket baskets for the TRX and now i´ve gone thru all my "favourites" and noooothing...
Anyone got a link for me??


Cheers

youngy

Re: Clutch....noise-ish

Post by youngy » Wed Jul 23, 2008 9:37 pm

hub....centre piece that the 6 screws go through.

User avatar
Killerwhale
Site Sponsor
Posts: 3797
Joined: Tue Aug 22, 2006 8:41 am
Location: GBG/Sweden
Contact:

Re: Clutch....noise-ish

Post by Killerwhale » Thu Jul 24, 2008 6:19 am

youngy wrote:hub....centre piece that the 6 screws go through.
Top!

...came to think of one more thing after turning off the comp...

When running engine in neutral and just pulling/letting clutch go it´s so much more noisy when pulled....

Could this has to relate to my driving style....not much ordinary breaking and a lot of engine break...!?

Post Reply