Page 1 of 1
fcr help/settings
Posted: Sat Mar 29, 2008 1:21 pm
by dillthedog
ok carbs have stopped overflowing and i have been out for a ride on it loved it but seems to bog down at low revs eg pulling away slow moving ect but get the revs up and hold on tight she pulls great my jets are
main 150`s needle clip in the middle slot
48 slow
200 main
1.0 fuel screw
1.5 slow air
i also have pod filters and a akra full system
any setting up tips would be nice
Re: fcr help/settings
Posted: Sat Mar 29, 2008 4:26 pm
by Killerwhale
dillthedog wrote:ok carbs have stopped overflowing and i have been out for a ride on it loved it but seems to bog down at low revs eg pulling away slow moving ect but get the revs up and hold on tight she pulls great my jets are
main 150`s needle clip in the middle slot
48 slow
200 main
1.0 fuel screw
1.5 slow air
i also have pod filters and a akra full system
any setting up tips would be nice
Well, mine are lean as hell if using under 170 mainjets...just bog´s on WOT.
Re: fcr help/settings
Posted: Sat Mar 29, 2008 9:44 pm
by cheesie
mine has fuel screw 1.0 turn out slow jet #48 slow air 1.5 turns out jet needle oc-emp, clip in third pos from top might still be a bit rich at half throttle, main jet 158 I also have a full akrapovic and K&N pod filters fitted only things I have changed form standard is the needle pos and the main jet
Re: fcr help/settings
Posted: Sun Mar 30, 2008 10:35 am
by dillthedog
just bog´s on WOT.
whats wot?
Re: fcr help/settings
Posted: Sun Mar 30, 2008 10:55 am
by Killerwhale
dillthedog wrote:just bog´s on WOT.
whats wot?
WideOpenThrottle
Re: fcr help/settings
Posted: Mon Mar 31, 2008 9:16 pm
by idl1975
dillthedog wrote:ok carbs have stopped overflowing and i have been out for a ride on it loved it but seems to bog down at low revs eg pulling away slow moving ect but get the revs up and hold on tight she pulls great my jets are
Maybe I'm missing something, but that sounds like a description of flatslides.
Or have they moved on since the last FCR equipped bike I rode (YZF750SP)?
Re: fcr help/settings
Posted: Mon Mar 31, 2008 9:23 pm
by Killerwhale
idl1975 wrote:dillthedog wrote:ok carbs have stopped overflowing and i have been out for a ride on it loved it but seems to bog down at low revs eg pulling away slow moving ect but get the revs up and hold on tight she pulls great my jets are
Maybe I'm missing something, but that sounds like a description of flatslides.
Or have they moved on since the last FCR equipped bike I rode (YZF750SP)?
Probably, my box says: Flat CR