Paddock stand
Posted: Tue May 15, 2007 9:48 am
I want to have a paddock stand with bobbins for the rear swing. What size is the thread holes for the bobbins? M10?
BR Jonas
.
BR Jonas
.
Page 1 of 1
Posted: Tue May 15, 2007 9:55 am
its a metric fine thread from memory, THINK its like M12x1.25 but theres yamaha universal ones.. so anything for R1 / R6 should fit.
Posted: Mon May 28, 2007 3:05 pm
I recived my bobbins today and they are for R1/R6. They are M6 
and won`t fit at all..
Do anybody know for sure the dimensions for the bobbins? M8, M10 or M12?
// Jonas
.
and won`t fit at all..Do anybody know for sure the dimensions for the bobbins? M8, M10 or M12?
// Jonas
.
Posted: Mon May 28, 2007 4:36 pm
Hi Jonas..
The thread you'll need is M8x1.25...
HTH
G
The thread you'll need is M8x1.25...
HTH
G
Posted: Mon May 28, 2007 5:42 pm
thanks.
I`ll look into it tomorrow.
// Jonas
.
I`ll look into it tomorrow.
// Jonas
.
Posted: Tue May 29, 2007 1:56 pm
got the 1.25 thread part right 
M8x1.25 is standard.. so just a normal 8mm bolt should fit in that instance
M8x1.25 is standard.. so just a normal 8mm bolt should fit in that instance
Posted: Wed Jun 06, 2007 12:47 am
According to R&G it's 10mm
Posted: Wed Jun 06, 2007 9:15 am
Hmmm, I have ordered 8mm now. Anybody who is sure of the size?According to R&G it's 10mm
// Jonas
.
Posted: Wed Jun 06, 2007 11:17 am
Looks like it is M10 that I`m after..
I tried a regular bolt on the bike.
// Jonas
.
I tried a regular bolt on the bike.
// Jonas
.
Posted: Wed Jun 06, 2007 11:31 am
Posted: Thu Jun 07, 2007 1:17 am
The bolt you need is the same as the rear caliper mounting bolt, but longer to accomodate the depth of the bobbin.Sanoj wrote:Looks like it is M10 that I`m after..
I tried a regular bolt on the bike.
// Jonas
.
Please dont ask how I know...
DFH
Posted: Thu Jun 07, 2007 12:40 pm
Sanoj ...
I had a look at mine last night - I was so convinced that it was 8mm that I took the bolt out to find
...... Martin was right at 10mm -
Apologies if I've busted your parts budget for this month!!
Greg (who is quite sorry for leading you up the garden path!)
I had a look at mine last night - I was so convinced that it was 8mm that I took the bolt out to find
...... Martin was right at 10mm - Apologies if I've busted your parts budget for this month!!
Greg (who is quite sorry for leading you up the garden path!)
Posted: Thu Jun 07, 2007 8:54 pm
No problem. I called the shop and told them to order M10 instead.Apologies if I've busted your parts budget for this month!!
Greg (who is quite sorry for leading you up the garden path!)
BR Jonas
.