Hi All,
Having put my trx back on the road following problems when the carbs float valves failed and flooded the engine. It now doesn't charge. I have measured the resistance between the 3 output words of the stator and nearly made the spec, however I have very low resistance from each wife with respect to earth. Measuring voltage from each output wire give 20vi on one but nothing on the other two. My questions are: will fuel contamination on the stator affect its operation. If so can the stator be repaired.
Grateful for any advice before I purchased a used stator.
Thanks Mick
Stator failed
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Mikerhayward
- TRX-Enthusiast
- Posts: 50
- Joined: Tue Nov 16, 2010 5:40 pm
- Location: andover, hampshire, UK
-
Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: Stator failed
..very low resistance from each wife with respect to earth..
If fuel in the oil affects the stator, well, does it matter if it's broken?
I would just buy a new one instead of getting the old one repaired.
They are widely available aftermarket. Unless you have a cheap and reliable address for rewinding the old one.
If fuel in the oil affects the stator, well, does it matter if it's broken?
I would just buy a new one instead of getting the old one repaired.
They are widely available aftermarket. Unless you have a cheap and reliable address for rewinding the old one.
-
Mikerhayward
- TRX-Enthusiast
- Posts: 50
- Joined: Tue Nov 16, 2010 5:40 pm
- Location: andover, hampshire, UK
Re: Stator failed
Good advice, can't find any for sale. Any recommendations. Mick
-
Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: Stator failed
For the UK? Just the regular webshops I suppose. Like Wemoto.
Or search ebay. Sorry I dont know much UK shops.
Or search ebay. Sorry I dont know much UK shops.