Airbox clamps

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
Phantom
TRX-Enthusiast
Posts: 17
Joined: Sat May 26, 2018 6:55 am

Airbox clamps

Post by Phantom » Mon Aug 16, 2021 12:19 pm

Hi all.
I was just putting my airbox back on and noticed that the clamps are not doing their job of holding on to the carbies,even when totally done up.
The airbox just pulls away from the carbs way too easy.
As well as the rubbers going into the airbox don't sit flush with the std carbies.
Is this a common Trx thing?
This is my first Trx and I am still learning!!

Post Reply