On heavy braking from speed , the engine wants to stall. I get round this buy blipping the throttle, which is now getting to be a tad tiresome.
Tickover isn't set too low in my opinion.
I assume it's carb related. Any ideas ?
Ta.
Carb issue ?
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- dicky
- Site Sponsor / Administrator
- Posts: 1053
- Joined: Thu Jan 06, 2005 11:26 am
- Location: Ruffy, Victoria.
Re: Carb issue ?
Check for anywhere that air can enter after the butterfly.
The rubber boots between the carbs and the inlet stub are old enough to perish and crack.
The plastic Air-Cut valve covers crack, mostly the RHS one as it can get some sun.
Vacuum tubes to the fuel pump and tap.
The rubber boots between the carbs and the inlet stub are old enough to perish and crack.
The plastic Air-Cut valve covers crack, mostly the RHS one as it can get some sun.
Vacuum tubes to the fuel pump and tap.
dicky
OOOSDC #5
OOOSDC #5