Compression values
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 7
- Joined: Mon May 23, 2016 7:13 pm
Compression values
Just done a comp check on my engine. Getting a max reading of 200PSI on each cylinder. The spec. is 184PSI max. Does this mean my motor has been fettled? Is it safe to run in this condition?
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: Compression values
Carbon build up in the chamber and piston crown will take up volume and increase your pressure.
TRX's run rich from Std and it only get worse as the needles and tubes wear unless jetted correctly.
TRX's run rich from Std and it only get worse as the needles and tubes wear unless jetted correctly.
laughter is the best medicine