clutch cable

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
Wombat
Forum Marsupial
Posts: 1092
Joined: Fri Jan 07, 2005 10:50 am
Location: Carlingford, Sydney, Australia

clutch cable

Post by Wombat » Fri Mar 02, 2007 7:47 am

Clutch cable is cactus. Can't get one in a hurry, except from the wreckers :D :?: What other models fit the TRX, just in case? Ta.

Bob
"The fire is almost out......and there's nothing left to burn!"

twolfe
Site Sponsor
Posts: 227
Joined: Thu Jan 06, 2005 10:29 pm
Location: Sydney,OZ

Post by twolfe » Fri Mar 02, 2007 9:56 am

Where have you tried Bob?

User avatar
Wombat
Forum Marsupial
Posts: 1092
Joined: Fri Jan 07, 2005 10:50 am
Location: Carlingford, Sydney, Australia

Post by Wombat » Fri Mar 02, 2007 10:16 am

Terry,

Tried Bike and Power at Dural,
Bikebiz at Parramatta,
Frettens at Blacktown.

Metro Spares at Silverwater (the wreckers) have a few in stock (s/h) at $15 ea. I could buy 3 for the price of a new one. I just want a usuable one pronto, until I can order a new one.

Bob.

BTW there's a place over at Arncliffe called Consolidated Wire that do replacement cables at a very reasonable price. When I got the FCR's put on the Guzzi, the cables were a mish mash of Guzzi and Ducati parts. CW made me copies of these for about $40 and they were perfect. Something to think about especially if you're in Sydney.
"The fire is almost out......and there's nothing left to burn!"

twolfe
Site Sponsor
Posts: 227
Joined: Thu Jan 06, 2005 10:29 pm
Location: Sydney,OZ

Post by twolfe » Fri Mar 02, 2007 11:37 am

will check with "on two wheels" at penrith tomorrow, i'll see if they have any

User avatar
Wombat
Forum Marsupial
Posts: 1092
Joined: Fri Jan 07, 2005 10:50 am
Location: Carlingford, Sydney, Australia

Post by Wombat » Sat Mar 03, 2007 3:41 am

Don't worry Terry. Thanx all the same. Got 2 perfectly serviceable used ones from Metro Spares this morning for $15 ea. Put the best one on and it feels like new. The one I had on the bike must have been binding internally. Looking at my log, I purchased those cables 5 years ago and put it on 2 - 3 years ago, so not bad going I would think?

Bob
"The fire is almost out......and there's nothing left to burn!"

twolfe
Site Sponsor
Posts: 227
Joined: Thu Jan 06, 2005 10:29 pm
Location: Sydney,OZ

Post by twolfe » Sat Mar 03, 2007 3:55 am

It was the same story anyway.Didn't have one but could order it

User avatar
Wombat
Forum Marsupial
Posts: 1092
Joined: Fri Jan 07, 2005 10:50 am
Location: Carlingford, Sydney, Australia

Post by Wombat » Sat Mar 03, 2007 4:16 am

Thanx Terry for the effort :D Bought an 'R1 tail light lens assembly today too. Next project. ha ha

Bob
"The fire is almost out......and there's nothing left to burn!"

Post Reply