Popping from exhausts on overrun - NOW SORTED!
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: Popping from exhausts on overrun - NOW SORTED!
Yes I think looking at 3 D printing it is a smart idea.
If you can do it cheap, there is bound to be a market as the Mikuni carbs are used on multitudes of bikes.
Once the words out on a few forums you may be on a winner..
If you can do it cheap, there is bound to be a market as the Mikuni carbs are used on multitudes of bikes.
Once the words out on a few forums you may be on a winner..
laughter is the best medicine
-
- Site Sponsor
- Posts: 51
- Joined: Wed Nov 07, 2012 12:53 am
Re: Popping from exhausts on overrun - NOW SORTED!
Yet again this forum proves invaluable. Had the same problem and assumed it to be a leak somewhere in the exhaust so re-sealed and tightened everything with no change to problem. Checked and read this post and checked - my right hand carb had exact same cracking in this plastic cover, so have glued that up temporarily and bike now runs perfectly.
Now - has anyone got a standard carb or set of 2 they want to sell which has/have these covers in good condition (no cracks or perishing) ?, preferably in South East Qld to save postage. Let me know, thanks.
Now - has anyone got a standard carb or set of 2 they want to sell which has/have these covers in good condition (no cracks or perishing) ?, preferably in South East Qld to save postage. Let me know, thanks.
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: Popping from exhausts on overrun - NOW SORTED!
There was a seller on ebay in Italy that had 10 or more sets of NEW 38mm Mikuni carbs to suit Trx/Tdm/xtz and various ducati's that use the same carbies.
The only difference with the Ducati pair would be the throttle cable/link pulls from a different angle.
That and any primary jetting difference can be taken from your originals.
The needles and emulsion tubes are the same...
They where about $220 shipped to Aust for the pair of new carbies.
Do a bit of a search on ebay, world wide you he may still have a set or 2.
http://www.ebay.com.au/itm/301767136673 ... EBIDX%3AIT
The only difference with the Ducati pair would be the throttle cable/link pulls from a different angle.
That and any primary jetting difference can be taken from your originals.
The needles and emulsion tubes are the same...
They where about $220 shipped to Aust for the pair of new carbies.
Do a bit of a search on ebay, world wide you he may still have a set or 2.
http://www.ebay.com.au/itm/301767136673 ... EBIDX%3AIT
laughter is the best medicine
- johno440
- Site Sponsor
- Posts: 99
- Joined: Thu Dec 02, 2010 2:44 am
- Location: Brisbane, Australia
Re: Popping from exhausts on overrun - NOW SORTED!
I have a used set availabl which I've only taken the TPS off. I'm in Burpengary. PM me if interested.
- dandywarhol
- Site Sponsor
- Posts: 1639
- Joined: Fri Nov 24, 2006 12:56 pm
- Location: Edinburgh, Scotland
Re: Popping from exhausts on overrun - NOW SORTED!
Also don't have the coolant or appear to have the TPS facility either - still cheap carbscobbadiggabuddyblooo wrote:There was a seller on ebay in Italy that had 10 or more sets of NEW 38mm Mikuni carbs to suit Trx/Tdm/xtz and various ducati's that use the same carbies.
The only difference with the Ducati pair would be the throttle cable/link pulls from a different angle.
That and any primary jetting difference can be taken from your originals.
The needles and emulsion tubes are the same...
They where about $220 shipped to Aust for the pair of new carbies.
Do a bit of a search on ebay, world wide you he may still have a set or 2.
http://www.ebay.com.au/itm/301767136673 ... EBIDX%3AIT
1996 TRX 850, blue, Ohlins 46HRCLS, Race Tech Gold Valves, 0.90 springs, Venom pipes, R6 brakes............
1974 Yamaha RD250A, Candy Blue
1998 Yamaha SZR660, blue of course
1967 Yamaha TD1C 250, Blue and white
1974 Yamaha RD250A, Candy Blue
1998 Yamaha SZR660, blue of course
1967 Yamaha TD1C 250, Blue and white
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: Popping from exhausts on overrun - NOW SORTED!
Yes 99% of the internals would be generic including that white plastic thingo that seems to be the gremlin people are finding of late.
Can rebuild your carbies with your own body or chop n change throttle/TPS set up..
Can rebuild your carbies with your own body or chop n change throttle/TPS set up..
laughter is the best medicine
-
- Site Sponsor
- Posts: 51
- Joined: Wed Nov 07, 2012 12:53 am
Re: Popping from exhausts on overrun - NOW SORTED!
Thanks for the replies guys. Johno440 - I tried to send a PM but I don't think it worked. Haven't done one before so no doubt me not doing it correctly.
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: Popping from exhausts on overrun - NOW SORTED!
click on your messages on top left of page.
On that page you will see a section on the left ... OPTIONS
have a look on the out box or sent messages to see if successful..
On that page you will see a section on the left ... OPTIONS
have a look on the out box or sent messages to see if successful..
laughter is the best medicine
- johno440
- Site Sponsor
- Posts: 99
- Joined: Thu Dec 02, 2010 2:44 am
- Location: Brisbane, Australia
Re: Popping from exhausts on overrun - NOW SORTED!
Call me tomorrow 0466 554544
- pom in nz
- TRX-Enthusiast
- Posts: 111
- Joined: Mon Jul 21, 2008 11:35 am
- Location: Auckland
Re: Popping from exhausts on overrun - NOW SORTED!
thanks guys, had the same backfiring from my bike, so I just painted the plastic thing with black smooth rite
now shes all good
now shes all good
if its too hard, your doing it wrong.
-
- TRX-Enthusiast
- Posts: 2
- Joined: Sat Jul 25, 2015 2:15 pm
Re: Popping from exhausts on overrun - NOW SORTED!
So did anyone work out where to get a new Air-Cut Valve Cover from in Aus?? I need one too. Have glued mine up but really want to replace it.
-
- Site Sponsor
- Posts: 2149
- Joined: Sat Apr 02, 2011 10:36 pm
- Location: brisbane AUSTRALIA
Re: Popping from exhausts on overrun - NOW SORTED!
ID just make one myself.Ruste wrote:So did anyone work out where to get a new Air-Cut Valve Cover from in Aus?? I need one too. Have glued mine up but really want to replace it.
You could always buy one from KEDO Ruste.
Sixth post down on page one,this topic.
-
- TRX-Enthusiast
- Posts: 338
- Joined: Mon Oct 13, 2008 4:38 am
- Location: Perth, Western Australia
Re: Popping from exhausts on overrun - NOW SORTED!
I don't know that you could make them yourself - if you look really carefully on the inside of the offending
plastic part you can see a tiny air passage which would be required to operate the diaphragm.
I don't know if you could replicate this - if it was just a plain solid disc it would be easy ....
Andy
plastic part you can see a tiny air passage which would be required to operate the diaphragm.
I don't know if you could replicate this - if it was just a plain solid disc it would be easy ....
Andy
Once you've had black - you'll never go back!
Bigamy is when you have one wife too many - Monogamy is the same!
Bigamy is when you have one wife too many - Monogamy is the same!
-
- TRX-Enthusiast
- Posts: 2
- Joined: Sat Jul 25, 2015 2:15 pm
Re: Popping from exhausts on overrun - NOW SORTED!
Thanks Alex. Was hoping not to pay the stupid amount of freight quoted. Will ask a friend if he thinks he can 3D print it for me. If not I'll annoy Kedo Australia or pester some wreckers.alextrx850 wrote: ID just make one myself.
You could always buy one from KEDO Ruste.
Sixth post down on page one,this topic.
-
- TRX-Enthusiast
- Posts: 8
- Joined: Fri Mar 25, 2016 8:53 am
Re: Popping from exhausts on overrun - NOW SORTED!
Hey all. Brand new Rex owner from NZ. Having the same issue, bad popping on overrun. My bike has been fairly modified by the previous owner into somewhat of a cafe racer style including megaphone exhausts. These are very minimal on the baffling and noise reduction, oooooh they do sound good though!! I don't seam to have the same issue with the cracked plug on the carb but am wondering if it's caused by the megaphones and their lack of baffling? I have read this can cause the same issue. I ride her everyday as my main mode of traffic avoidance so before I start stripping and diagnosing I want to try rule out the mufflers. Any light shed would be much appreciated!