Which clutch cable for higher bars?

Kayla · Post by **Kayla** » Tue Jun 08, 2010 4:21 pm

Those of you using risers and superbike type bars- what did you do for a clutch cable? Did you just buy a TDM850 one?

Post by **Mincehead** » Tue Jun 08, 2010 7:23 pm

Nope, Streetfighterstore( TRX ) obviously:

http://www.streetfighterstore.co.uk/trx_850/155

Or Venhills and have a longer one made.

Someone told me a divvy one would fit but I`ve not looked into that kayla.

kingoffifa · Post by **kingoffifa** » Wed Jun 09, 2010 12:58 am

hi!

this lad used tdm cables appartently. see his description. cant figure what handle bars he is using.

anyone having a bid?

http://cgi.ebay.co.uk/YAMAHA-trx-850-st ... 1c131fcd75

Kayla · Post by **Kayla** » Wed Jun 09, 2010 6:13 am

Mincehead wrote:Nope, Streetfighterstore( TRX ) obviously:

http://www.streetfighterstore.co.uk/trx_850/155

Â£27.66

For a cable? Excluding VAT? Bloody hell. I've bought bikes that've cost less than that

I might give the divvy one a try Geoff, you can get them for less than Â£10

kingoffifa- That's not yours, is it? You have to admire the optimism of the person who wrote that advert

FANDANGO · Post by **FANDANGO** » Wed Jun 09, 2010 10:38 am

I believe a Diversion (600?) also fits - its about 10cm or so longer so can be routed better and accounts for the risers.

eisi · Post by **eisi** » Wed Jun 09, 2010 12:05 pm

I took the version of TDM-4TX-clutch-cable and itÂ´s running perfectly

eisi

Post by **Mincehead** » Wed Jun 09, 2010 1:26 pm

Blimey!!!!!
Never looked at their prices before Kayla, yes that`s ridiculous Venhills would custom make a stainless braided outer one-off for less than that!
Good to know the TDM-4TX cable fits, cheers Eisi.

Kayla · Post by **Kayla** » Wed Jun 09, 2010 1:43 pm

Yep, thanks Fandango and Eisi

Knowledge is power

Glyn · Post by **Glyn** » Wed Jun 09, 2010 9:31 pm

I bought a clutch cable from the fabled streetfighter store and it was all wrong - needed 35mm off the outer and the whole thing is about 50mm too long to lose the excess. I just modded it as I didn't want to wait for another but I was wrong. It sucks.

Post by **Mincehead** » Wed Jun 09, 2010 9:38 pm

Well if I got one at that price and it was wrong I would be re-routing it anally up streetfighter store!

Oh and if you`ve a Hein Gerrick near you there`s always the universal kit available, although they don`t show it online it`s still in their main catalogue so they must still do it.

pwmotorsports · Post by **pwmotorsports** » Sat Jun 12, 2010 5:22 pm

divvy 600 on mine works well

kingoffifa · Post by **kingoffifa** » Sun Jun 13, 2010 3:23 am

no its not my bike. just spotted it while trawling ebay. think it was the same day you put up this post so it was fresh in my memory.

Kayla · Post by **Kayla** » Sun Jun 13, 2010 2:59 pm

I ordered a new '96-on TDM850 one from fleabay yesterday for just under Â£9

Kayla · Post by **Kayla** » Tue Jun 15, 2010 8:25 am

Kayla wrote:I ordered a new '96-on TDM850 one from fleabay yesterday for just under Â£9

Just so people know for definite, this one fits fine

Tarwetijger · Post by **Tarwetijger** » Tue Jun 15, 2010 9:40 pm

kingoffifa wrote:this lad used tdm cables appartently. see his description. cant figure what handle bars he is using.

anyone having a bid?

http://cgi.ebay.co.uk/YAMAHA-trx-850-st ... 1c131fcd75

... and i hope you will agree now makes the bike look fantastic.

Nope, sorry.

Yamaha TRX850 Enthusiasts Forum

Which clutch cable for higher bars?

Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?

Re: Which clutch cable for higher bars?