just got home from the dyno!

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
brockzila
TRX-Enthusiast
Posts: 348
Joined: Mon Feb 18, 2008 2:30 pm

just got home from the dyno!

Post by brockzila » Fri Aug 15, 2008 3:24 pm

The read out is saying 74hp so its not to far off. but its running super rich, down to 11.5:1 at some points, it also has a misfire at low throttle settings, will put up the photos of the dyno runs tonight.
the dude reckons the pilot jet may be blocked and the mains ned to be brouught down as well.
can any one tell me what the std mains are as i know it has been played with in the past!

more to follow
Is it Brock friendly???

User avatar
steve speed
Site Sponsor
Posts: 1780
Joined: Sun Jan 14, 2007 9:11 pm
Location: rochdale England

Re: just got home from the dyno!

Post by steve speed » Fri Aug 15, 2008 4:11 pm

std mains are 142.5 :D :D
TRX850 ,The thinking mans R1

User avatar
brockzila
TRX-Enthusiast
Posts: 348
Joined: Mon Feb 18, 2008 2:30 pm

Re: just got home from the dyno!

Post by brockzila » Mon Aug 18, 2008 3:59 pm

ok so here are the dyno runs
he put it through a few times with different throttle settings.
100%
http://i92.photobucket.com/albums/l27/b ... C00066.jpg
75%
http://i92.photobucket.com/albums/l27/b ... C00071.jpg
50%
http://i92.photobucket.com/albums/l27/b ... C00068.jpg
25%
http://i92.photobucket.com/albums/l27/b ... C00069.jpg
10%approx
http://i92.photobucket.com/albums/l27/b ... C00070.jpg

im planning on pulling the carbs apart tomorrow and find out the the prev owner has done to the jetting
Im running scorion cans and a k&n filter, i have a dyno jet kit some where as well.

any one got any clue on wht i need to do to get it runnin sweet.

It also has a small miss at low revs, have a set of plugs already and am going to check the ht leads tomorrow as well.
Is it Brock friendly???

Post Reply