Hi , looking for the id , od , length etc of the TRX 850 swingarm bearings.
Here in good old south africa , Yamaha agents either do not have or charge a fortune for TRX parts , so hoping
to source from a normal bearing place BUT need the sizes ....
Anyone , please ?
Thanks
Robi
TRX 850 swingarm bearing suzes
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 8
- Joined: Mon Aug 16, 2010 7:53 am
- Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: TRX 850 swingarm bearing suzes
do a search on the forum for bearing sizes, or have a look in the Tech / Trouble Questions section
Paul
- Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact:
Re: TRX 850 swingarm bearing suzes
They are caged needle roller bearings and if you have the swingarm out the size is etched on the cage. You`ll have to likely degrease them to see it, as for length, it`s not too important because they have plenty of `free space` in the swingarm between them so it`s really inside and outside diameters you`re looking for.
A good bearing supplier will be able to track some down for you as I`m certain they`ll be generic metric caged needle roller bearings.
The TRX ones are like these:
http://simplybearings.co.uk/shop/Bearin ... index.html
Simply Bearings in the UK are a great company by the way folks.
A good bearing supplier will be able to track some down for you as I`m certain they`ll be generic metric caged needle roller bearings.
The TRX ones are like these:
http://simplybearings.co.uk/shop/Bearin ... index.html
Simply Bearings in the UK are a great company by the way folks.
LOUD PIPES SAVE LIVES
-
- TRX-Enthusiast
- Posts: 8
- Joined: Mon Aug 16, 2010 7:53 am
Re: TRX 850 swingarm bearing sizes
Guys , thanks a lot , found an older post where all the bearing sizes are listed
and that is really useful
Robi
and that is really useful
Robi