hi all
i want to lift my trx up so i can access the front wheel forks ect as i have a bit of a head shake when i slow down, but not sure how to do it,
or where to jack her up from. looks like its a choice between an abbus center stand or exhaust,s off and maybe
jack up from the engine some where , any tips or advice please.
lifting points ?
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- Con Rod
- Site Sponsor
- Posts: 1126
- Joined: Wed Nov 16, 2011 11:48 pm
- Location: Sydney, Australia
Re: lifting points ?
Paddock stand at the rear and a jack and a price of wood under the header pipes, they are well strong enough to take the weight.
I have done this many many times.
I have done this many many times.
Paul
-
- TRX-Enthusiast
- Posts: 19
- Joined: Sun Jul 15, 2012 10:26 pm
Re: lifting points ?
cheers con rod ..........
- trixynut
- Site Sponsor
- Posts: 2572
- Joined: Fri Sep 22, 2006 3:48 pm
- Location: Leicester, England
Re: lifting points ?
Or piece of 9mm bar through loops at front of engine and an axle dtsnd either side or blocks of wood. Dont need rear paddock stsnd for this.
-
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: lifting points ?
Now THAT makes CentsCon Rod wrote: a jack and a price of wood under the header pipes
laughter is the best medicine
-
- TRX-Enthusiast
- Posts: 19
- Joined: Sun Jul 15, 2012 10:26 pm
Re: lifting points ?
cheers chaps,
removed front wheel as i suspected the bearings had gone, there was a fair bit of movement in the spindle. so ive orderd new bearings but there just the same theres still alot of play spindle.
removed front wheel as i suspected the bearings had gone, there was a fair bit of movement in the spindle. so ive orderd new bearings but there just the same theres still alot of play spindle.