I gave my pal Paul (tzx660) my old yzf 750 front brake calipers with seized pistons and he came up with a very usefull idea to remove them.
Simples
brake caliper piston removal
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- dixonj
- Site Sponsor
- Posts: 637
- Joined: Wed Oct 13, 2010 5:32 pm
- Location: CUMBRIA
- cal
- TRX-Enthusiast
- Posts: 652
- Joined: Wed Jul 28, 2010 11:46 pm
- Location: York
- Contact:
- M.V.
- Site Sponsor
- Posts: 1509
- Joined: Sat Jul 04, 2009 3:23 am
- Location: Melbourne, Australia
Re: brake caliper piston removal
Top stuff!
I blew mine out with compressed air, but obviously if they're seized, that won't be an option.
I blew mine out with compressed air, but obviously if they're seized, that won't be an option.
-
- TRX-Enthusiast
- Posts: 342
- Joined: Mon Nov 08, 2010 5:29 am
- Location: Melbourne Australia
Re: brake caliper piston removal
often you can hook up a grease gun to the bleed port, crimp the hose or seal the hose port and pump them out with grease.
the grease gun will generate a LOT of pressure, be careful.
for multiple seized pistons you put a G clamp on all but one, get it moving and change the G clamp to the now free one, etc, etc.
Usually once they start to move the job is 90% done.
Bit of a cleanup afterwards.
Pirtek or hydraulic hose people have all the fittings needed.
I am always hesitant to use compressed air, its a bit dangerous but hey, if you know its dangerous and take precautions, all power to you.
Try to aim the piston in the general direction of a politician, lawyer or insurance salesperson if possible, to lessen the ongoing increase in patheticnuss or society is taking on.
(old persons rant done now, feeling better, go back to busted Yams)
the grease gun will generate a LOT of pressure, be careful.
for multiple seized pistons you put a G clamp on all but one, get it moving and change the G clamp to the now free one, etc, etc.
Usually once they start to move the job is 90% done.
Bit of a cleanup afterwards.
Pirtek or hydraulic hose people have all the fittings needed.
I am always hesitant to use compressed air, its a bit dangerous but hey, if you know its dangerous and take precautions, all power to you.
Try to aim the piston in the general direction of a politician, lawyer or insurance salesperson if possible, to lessen the ongoing increase in patheticnuss or society is taking on.
(old persons rant done now, feeling better, go back to busted Yams)
there are only 3 types of people in the whole world
those who can count
and those who cannot
those who can count
and those who cannot