When doing my 878 kit i got two different answers on the piston play from the one i bought of and TTS, it differed quite a lot so i rang up JE in US directly and gave them the piston number and actually got a third answer. In my case i went with the answer i got from JE wich was
1/800 of a mill, just a heads up on that.
Cheers
Je 878 kit, while i have it in mind
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
-
steve speed
- Site Sponsor
- Posts: 1780
- Joined: Sun Jan 14, 2007 9:11 pm
- Location: rochdale England
Re: Je 878 kit, while i have it in mind
did you have the crank and balance shafts rebalanced ?? you know why i ask
TRX850 ,The thinking mans R1
-
Dash
- TRX-Enthusiast
- Posts: 31
- Joined: Sun Jul 13, 2008 9:13 pm
Re: Je 878 kit, while i have it in mind
Why do you ask? seriously, I`d like to knowsteve speed wrote:did you have the crank and balance shafts rebalanced ?? you know why i ask
What`s that coming over the hill? Is it a T-ReX, is it a T-ReX?
Currently riding the TRX on Boris Jeltsin mode...
Currently riding the TRX on Boris Jeltsin mode...
-
Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
Re: Je 878 kit, while i have it in mind
Nothing done....yetsteve speed wrote:did you have the crank and balance shafts rebalanced ?? you know why i ask
Next "step" would be lighten/balance it and going over the rods....one never stop heh??
I have a set of alu hyperplates going in....and an extra flywheel wich are going to be lightened...we´ll see after that!
-
steve speed
- Site Sponsor
- Posts: 1780
- Joined: Sun Jan 14, 2007 9:11 pm
- Location: rochdale England