R1 fork settings

billy budge · Post by **billy budge** » Sun Jul 15, 2007 8:08 pm

This is for all you rexers that have done the good deed of fitting r1 forks.

Before anyone pipes up with 'yes but we are all different weights, height, styles blah blah blah', i know this already but im just after what sort of settings are working on the r1 forks in all 3 adjustments please, purely out of interest.

Havent had a chance to ride out and have a play due to weather/work/new baby girl etc so was after an ideal start point that i can fine tune once road going again.

cheers

PhatVR6 · Post by **PhatVR6** » Sun Jul 15, 2007 8:24 pm

I've got mine set 4 clicks off full for rebound, all the way in for compression (I think? might be the other way round).

and prelod on the 2nd softest setting (i'm on renthals, and only 12 stone so not much weight over the front)

steve speed · Post by **steve speed** » Sun Jul 15, 2007 9:57 pm

PhatVR6 wrote:I've got mine set 4 clicks off full for rebound, all the way in for compression (I think? might be the other way round).

and prelod on the 2nd softest setting (i'm on renthals, and only 12 stone so not much weight over the front)

i hope it is the other way round

billy budge · Post by **billy budge** » Sun Jul 15, 2007 10:13 pm

Steve - thanks for clearing that one up, that wouldve made for an interesting ride??

Phat - cheers for the settings mate, almost an ideal starting point for me.
im also on renthals and im around 12.5 stone so will give that a try and work from there.

PhatVR6 · Post by **PhatVR6** » Sun Jul 15, 2007 10:37 pm

steve run that by me again.

the bottom adjuster is for what? and should be set at what?

youngy · Post by **youngy** » Sun Jul 15, 2007 11:38 pm

bottom is compression