Hi guys, long time since I've been on here. I need to inspect the float needles on my trx. Can somebody advise if it's possible to remove the float bowls with the carbs in place of do they need to come off.
Thanks Mick
Advice on carbs please.
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
- TRX-Enthusiast
- Posts: 50
- Joined: Tue Nov 16, 2010 5:40 pm
- Location: andover, hampshire, UK
- Rod.s
- Site Sponsor
- Posts: 1404
- Joined: Sun Apr 25, 2010 11:01 am
- Location: Brisbane, Australia
Re: Advice on carbs please.
You'll need to remove the carbs...Mikerhayward wrote:Hi guys, long time since I've been on here. I need to inspect the float needles on my trx. Can somebody advise if it's possible to remove the float bowls with the carbs in place of do they need to come off.
Thanks Mick
If it's not made in China, it's a fake!
- Tarwetijger
- TRX-Enthusiast
- Posts: 1537
- Joined: Tue May 15, 2007 9:31 am
- Location: Netherlands, Assen
- Contact:
Re: Advice on carbs please.
Even if it would be possible, I'm sure you don't want to.
-
- TRX-Enthusiast
- Posts: 50
- Joined: Tue Nov 16, 2010 5:40 pm
- Location: andover, hampshire, UK
Re: Advice on carbs please.
Thanks,
seems a bit of a job to have to take the carbs off just to adjust the float levels. the recount to measure again. Always done it when the carbs are easily accessible.
Hey ho.
Mick
seems a bit of a job to have to take the carbs off just to adjust the float levels. the recount to measure again. Always done it when the carbs are easily accessible.
Hey ho.
Mick