I have uploaded to Thingiverse, a design to print the Air-cut Cover for the STD carbies, search under TRX850.
The finish will depend on where and who does the printing for you, I have used both my local library (South Australia) and a 3d Hub member, the library is cheaper, while you have more control with the 3d Hub member.
I have tested with one of my older designs as in the photo, it worked fine.
Print at least 50% solid for strength and in ABS for fuel resistance. Black is better for UV resistance.
Air-cut cover 3d printed
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- OzzieDave
- TRX-Enthusiast
- Posts: 91
- Joined: Sun Oct 02, 2016 11:33 pm
- Location: Woodcroft, South Australia
Air-cut cover 3d printed
Proudly Aspergian. Yellow 98 TRX850, Staintune mufflers, braided brake hoses, blue spot brakes, remote control ignition switch, Ignitech ECU. 17/42 525 chain.
- Snod Blatter
- TRX-Enthusiast
- Posts: 405
- Joined: Sun Sep 16, 2012 8:40 am
- Location: Worksop, UK
Re: Air-cut cover 3d printed
Bloody marvellous
'95 4NX with K&N filter, Motad Venom cans, YSS PD valves, Ohlins fork springs, 530 C+S, Green CDI, 11/16 radial master cylinder, +30mm jack up dog bones. Enjoyable money pit.
- davamb
- TRX-Enthusiast
- Posts: 826
- Joined: Fri Sep 05, 2008 12:53 am
- Location: 10mins from PI
Re: Air-cut cover 3d printed
Nice work!
What was the printer you used Dave? I spend around 25% of my time doing Solidworks and Turbocad 3D design and have been thinking about buying a printer for my own use - my boss is too stingy to buy one for us to use for prototyping.
What was the printer you used Dave? I spend around 25% of my time doing Solidworks and Turbocad 3D design and have been thinking about buying a printer for my own use - my boss is too stingy to buy one for us to use for prototyping.
Ride Well!
Cheers, Dave.
Cheers, Dave.
- OzzieDave
- TRX-Enthusiast
- Posts: 91
- Joined: Sun Oct 02, 2016 11:33 pm
- Location: Woodcroft, South Australia
Re: Air-cut cover 3d printed
The library has a Makerbot I think, I don't have one myself, the 3d Hub member has several, can't remember which brands he has.
Proudly Aspergian. Yellow 98 TRX850, Staintune mufflers, braided brake hoses, blue spot brakes, remote control ignition switch, Ignitech ECU. 17/42 525 chain.
-
- TRX-Enthusiast
- Posts: 3
- Joined: Thu Jul 16, 2020 3:58 pm
- Location: New Zealand
Re: Air-cut cover 3d printed
I was spending some time reading chrome translated trx850 japanese blog sites and discovered this little gem :
This Kawasaki part appears to be identical , I believe it is off a KL250 super sherpa
COVER,AIR CUT VALVE part number 14090-1873
This Kawasaki part appears to be identical , I believe it is off a KL250 super sherpa
COVER,AIR CUT VALVE part number 14090-1873