Quickshifter....yelp please

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
Racer-unk
TRX-Enthusiast
Posts: 286
Joined: Fri Mar 03, 2017 5:28 am
Location: Port Elizabeth, South Africa

Quickshifter....yelp please

Post by Racer-unk » Thu Jul 06, 2017 9:33 am

Please assist I am taking bike to track Saturday....first time with Ignitech quick shifter.
What are the best values for Clutch Master time and Pause?

secondly the way the standard linkage set-up is, I had to mount my Quick shifter upside down.
Even with the supplied rods I could not mount it the correct way.
any thoughts on that?

cobbadiggabuddyblooo
Site Sponsor
Posts: 6809
Joined: Thu Aug 28, 2008 9:19 am
Location: Brisbane,Australia

Re: Quickshifter....yelp please

Post by cobbadiggabuddyblooo » Thu Jul 06, 2017 1:02 pm

Mine is set on 100Ms, if you hit a few neutrals try 120Ms.. I choose not to use the Q/s from 1st to 2nd...
Leave the other at 500Ms as it's just for switch bounce.

Make sure the linkages are all nice and tight with no slop or extra movement.
I've just gone through and shimmed all the brake/gear shift lever pivots on my rearsets to tighten them up to take out any excess play plus where the ball joints mount too.
laughter is the best medicine

User avatar
Racer-unk
TRX-Enthusiast
Posts: 286
Joined: Fri Mar 03, 2017 5:28 am
Location: Port Elizabeth, South Africa

Re: Quickshifter....yelp please

Post by Racer-unk » Thu Jul 06, 2017 1:35 pm

thanks Cobba....you are a star

Post Reply