FCR 41 Throttle cables

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
BamBamTheAprilia
TRX-Enthusiast
Posts: 18
Joined: Thu Feb 06, 2014 11:14 am
Location: Wirral , Merseyside. UK

FCR 41 Throttle cables

Post by BamBamTheAprilia » Tue Mar 07, 2017 11:35 pm

I have a set FCR41s which are now ready to be fitted ( they were off an XTZ750 so had shorter spigots, any how I had new spigots machined up by a mate ) , my question is two fold .
1) Am I able to use the standard throttle cables with the FCR's ?
2) bin or keep the TPS ?
I have an ignitech ecu fitted ( from Cobba ) so I can run with or without

cobbadiggabuddyblooo
Site Sponsor
Posts: 6809
Joined: Thu Aug 28, 2008 9:19 am
Location: Brisbane,Australia

Re: FCR 41 Throttle cables

Post by cobbadiggabuddyblooo » Wed Mar 15, 2017 9:25 am

Keep the TPS if there is a mount for it on the FCR's.
Std throttle cables don't fit.
I've seen 1 trx that had shorter spigot FCR's and he had the filler pipe cut off from the top sump with just a small stub left and then he fitted a flexible rubber hose as the filler tube to stop the fouling of the ACC pump.
laughter is the best medicine

Post Reply