Fuel tap fix
Posted: Fri Nov 04, 2016 5:28 am
After reading the forum for a fix to the tap leaking, I have done the following.
Purchased a viton o'ring from BSC (Bearing and Power Transmission Solutions), Lonsdale, SA
5x2 size, stretched the spring behind the diaphragm to 40mm (as mentioned in a post) and now have no leaks.
Also glued the elbow in using JB Weld.
Purchased a viton o'ring from BSC (Bearing and Power Transmission Solutions), Lonsdale, SA
5x2 size, stretched the spring behind the diaphragm to 40mm (as mentioned in a post) and now have no leaks.
Also glued the elbow in using JB Weld.