Wiring harness routing.
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Bucko
- TRX-Enthusiast
- Posts: 81
- Joined: Sat Jul 12, 2014 8:42 pm
- Location: North Wales UK
Wiring harness routing.
Finally putting the TRX back together and although I took a few photos of the wiring harness routing before I stripped the frame down im not sure im getting the installation right, has anyone got any ideas where I could see some photos or diagrams for the correct route, any help much appreciated, thanks Steve.
-
Rich
- Site Sponsor
- Posts: 217
- Joined: Mon Dec 23, 2013 8:20 pm
- Location: Derbyshire UK
Re: Wiring harness routing.
if you download the manual I think the routing is all in there.
-
Bucko
- TRX-Enthusiast
- Posts: 81
- Joined: Sat Jul 12, 2014 8:42 pm
- Location: North Wales UK
Re: Wiring harness routing.
Thanks for that, also do you know if the coils mount inboard on the brackets or outboard , it looks like they go on the inside but all the pictures ive seen and access to the mounting screws seems to suggest they mount outboard of the brackets?
-
FANDANGO
- TRX-Enthusiast
- Posts: 64
- Joined: Thu Apr 24, 2008 3:55 pm
- Location: Accrington, Lancashire
Re: Wiring harness routing.
Outward, bolt goes through coil and then thread on the mount. Put the connections to the coil first, fiddley is word I would use...
-
Rich
- Site Sponsor
- Posts: 217
- Joined: Mon Dec 23, 2013 8:20 pm
- Location: Derbyshire UK
Re: Wiring harness routing.
I think you are being very restrained there - well done.FANDANGO wrote:fiddley is word I would use...
Certainly not the word I would use!