inlet tract spacing
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- Dav
- Site Sponsor
- Posts: 334
- Joined: Thu May 05, 2011 4:04 am
- Location: Glebe, Sydney
Re: inlet tract spacing
My verniers are at work but peering at a plastic ruler and measuring the engine side adapters on my 41s gives 52mm b/w adapters (outer surface) and 98mm centre to centre
- M.V.
- Site Sponsor
- Posts: 1509
- Joined: Sat Jul 04, 2009 3:23 am
- Location: Melbourne, Australia
Re: inlet tract spacing
Lucky Dav is here!
I forget that my old barrels are still at the engineers
Anyway, whipped the tank & airbox off, getting a rough figure of 98.5mm, bearing in mind I'm not very good at math & I've had a few red wines
I forget that my old barrels are still at the engineers
Anyway, whipped the tank & airbox off, getting a rough figure of 98.5mm, bearing in mind I'm not very good at math & I've had a few red wines
-
- TRX-Enthusiast
- Posts: 342
- Joined: Mon Nov 08, 2010 5:29 am
- Location: Melbourne Australia
Re: inlet tract spacing
Thanks guys,
I will go with 98.25 and spread 'em to that.
I will go with 98.25 and spread 'em to that.
there are only 3 types of people in the whole world
those who can count
and those who cannot
those who can count
and those who cannot
- Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact:
Re: inlet tract spacing
A mil or so either way will be fine the rubbers are flexible after all.
LOUD PIPES SAVE LIVES
-
- TRX-Enthusiast
- Posts: 342
- Joined: Mon Nov 08, 2010 5:29 am
- Location: Melbourne Australia
Re: inlet tract spacing
Actually measured it myself today with verniers , as good as anything to 100mm flat.
attached is a pic with a plain ol rooola.
There would be a little to and fro availble but for reference, round it up to a hundred.
cheers
attached is a pic with a plain ol rooola.
There would be a little to and fro availble but for reference, round it up to a hundred.
cheers
there are only 3 types of people in the whole world
those who can count
and those who cannot
those who can count
and those who cannot
- Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact: